BERGER-SEIDLE | AQUA-SEAL PAK STOP WOOD FILLER (4.5KG)
AquaSeal Pak Stop is a unique, extreme-performance, high-elastic trowel filler for closing wide joints.
Size: 4.5kg
Shop 250g tester here.
Coverage: approx 10sqm per L (in case of large joints and cavities, consumption may be increased considerably)
Use the following tool: BergerTool AquaSeal Trowel
Application: AquaSeal Pak Stop is a clear product which is coloured and activated by adding AquaSeal PafukiPowder (included) of a matching wood colour.
Immediately before use, PafukiPowder is added and mechanically stirred in order to achieve a homogeneous filler compound suitable for trowelling. We recommend using the Allway Tools Helix Mixer attached to a drill for this task.
The floor to be restored must be carefully sanded and any previous gap filler cleaned out. The mixed paste is quickly applied to the entire sanded floor using a stainless steel trowel.
Since AquaSeal Pak Stop is permanently high elastic, expansion gaps are allowed to move to a large extent. Shrinking of Pak Stop in very large joints during the drying process must be considered as normal. In this case, a second coat (also partially) must be applied after an overnight dry.
After sufficient drying, the surface is sanded once again to the bare wood (we recommend using 60grit). After fine sanding the floor can be coated with any kind of our finishing products.
Drying: Sandable after approx. 14-16 hours. Insufficient ventilation, low temperatures, high humidity or thick coats may delay drying considerably.
For very large gaps (5mm and up) consider using the Pafudima Round Cord first before applying your Pak Stop filler.
For smaller gaps less than 2mm we recommend using Berger-Seidle AquaSeal Pafuki.
Description
AquaSeal Pak Stop is a unique, extreme-performance, high-elastic trowel filler for closing wide joints.
Size: 4.5kg
Shop 250g tester here.
Coverage: approx 10sqm per L (in case of large joints and cavities, consumption may be increased considerably)
Use the following tool: BergerTool AquaSeal Trowel
Application: AquaSeal Pak Stop is a clear product which is coloured and activated by adding AquaSeal PafukiPowder (included) of a matching wood colour.
Immediately before use, PafukiPowder is added and mechanically stirred in order to achieve a homogeneous filler compound suitable for trowelling. We recommend using the Allway Tools Helix Mixer attached to a drill for this task.
The floor to be restored must be carefully sanded and any previous gap filler cleaned out. The mixed paste is quickly applied to the entire sanded floor using a stainless steel trowel.
Since AquaSeal Pak Stop is permanently high elastic, expansion gaps are allowed to move to a large extent. Shrinking of Pak Stop in very large joints during the drying process must be considered as normal. In this case, a second coat (also partially) must be applied after an overnight dry.
After sufficient drying, the surface is sanded once again to the bare wood (we recommend using 60grit). After fine sanding the floor can be coated with any kind of our finishing products.
Drying: Sandable after approx. 14-16 hours. Insufficient ventilation, low temperatures, high humidity or thick coats may delay drying considerably.
For very large gaps (5mm and up) consider using the Pafudima Round Cord first before applying your Pak Stop filler.
For smaller gaps less than 2mm we recommend using Berger-Seidle AquaSeal Pafuki.
